A sturdy high chair is definitely a must for anyone with a young child. This one, made from birch plywood, has both strength and stability — two important features to look for in a high chair. It also features a tray that’s larger than most you’ll see, with an edging to contain those inevitable spills. [...]

If you enjoy our post, feel free to subscribes to our rss feeds

Window Box Project : Fun for the family Display this easy-to-make window box on your deck or beneath a window. Colorful accent for your home or deck. Window Box Materials List One 2′ x 4′ Pre-Cut Project Panel Jigsaw, sabre saw or similar power tool with a plywood-cutting blade Wood glue Hammer Nails Sandpaper or [...]

If you enjoy our post, feel free to subscribes to our rss feeds

Christmas Sleigh Project : Festive & Fun Here’s an easy woodworking sleigh project to help put you in the Christmas spirit. Fun for everyone. Finished Size: Approximately 4′ x 2-1/2′ Christmas Sleigh Materials List 1 BC Plywood Panel, 19/32″ thickness (makes 2 sleighs) Jigsaw, sabre saw or similar power tool with plywood-cutting blade Transfer paper [...]

If you enjoy our post, feel free to subscribes to our rss feeds

Picket Fence Materials List Lumber to be pressure treated Southern Pine 7   1×2 @ 8′-0″  cut to: 1 @ 2′ – 9-3/4″ FRONT RAIL, top 1 @ 2′ – 9-3/4″ BACK RAIL, top 2 @ 12″ SIDE RAILS, top 38 @ 12-1/4″ PICKETS 1 1×4 @ 5′-0″ cut to: 4 @ 2-1/2″ x 2-1/2″ POST [...]

If you enjoy our post, feel free to subscribes to our rss feeds

Building a redwood deck over an existing concrete slab is an easy way to get the complete enjoyment of a deck at a fraction of the usual labor and cost. Concrete slabs that have been around for years are often cracked, uneven or just plain unsightly. Stable, weather resistant redwood can cover all these defects [...]

If you enjoy our post, feel free to subscribes to our rss feeds

ARBOR MATERIALS LIST 2 2×8 @ 7′ cut to 79″  TOP BEAMS 2 2×6 @ 5′ cut to 51″  SIDE BEAMS 4 2×4 @ 8′ cut to 93″  min. POSTS 3 2×2 @ 6′ cut to 6 36″ TOP PLANT SUPPORTS 1 2×2 @ 8′ cut to 4 19″ BRACKETS 11 1×2 @ 8* cut [...]

If you enjoy our post, feel free to subscribes to our rss feeds

The nesting box pictured here has been designed specifically for birds and allows for easy access for observation and cleaning. NESTING BOX MATERIALS LIST 23⁄32″ Plytanium™ Sanded Project Panels 24″ x 24″ precut 7⁄4″ galvanized nails or screws—approx. 20 7⁄4″ galvanized screw or nail for pivot point—2 Double-headed nail for holding door closed—1 BOX CONSTRUCTION [...]

If you enjoy our post, feel free to subscribes to our rss feeds

GARDEN GATE MATERIALS LIST Lumber to be pressure treated Southern Pine 1 2×6 @ 6′-6″ cut to: 2 @ 3′- 3″ SIDE STILES 3 2×6 @ 6′-0″ cut to: 2 @ 2′ -11-7/8″ MIDDLE STILES 4 @ 2′ -11-7/8″ RAILS 1 1×10 @ 3W cut to: 2′ -2-1/2″ SIGNBOARD 2 6×6 @ 8′- 0″ cut [...]

If you enjoy our post, feel free to subscribes to our rss feeds

With its straight edge and large surface, the shop-made sub-base shown at right ensures that your router will remain square to an edge guide clamped to the workpiece while you rout a series of equally spaced dadoes. Using 1/4-inch plywood, cut the sub-base about 10 inches wide and 13 inches long. Taper the sides so [...]

If you enjoy our post, feel free to subscribes to our rss feeds

Tiered Plant Stand Materials List Lumber to be pressure treated Southern Pine 6 2×2 @ 6’-0”, or 5 2×2 @ 8’-0” cut to: 4 @ 4’-0” LEGS 1 @ 4-1/2 NAILER sized-to-fit shelf EDGING 1 2×6 cut to: 1 @ 5-1/2 FINIAL BASE 1 2X8 cut to: 1 @ 6” FINIAL 3’X4’X1/2” exterior cdx plywood [...]

If you enjoy our post, feel free to subscribes to our rss feeds