Preparing the damaged area A damaged corner is best repaired with a patch. If the edges of the break are ragged or sharp, use a wood chisel to cut a shallow, oval-shaped mortise with smooth edges around the damage. Hold the chisel with the bevel facing down and work with the grain of the wood. [...]

If you enjoy our post, feel free to subscribes to our rss feeds

1. Squaring the end of the blade Use a try square to check whether the cutting edge of the blade is square. If it is not, square it on a grinder with a rough wheel. With the guard properly positioned and the blade clear of the wheel, switch on the machine. Holding the blade between [...]

If you enjoy our post, feel free to subscribes to our rss feeds

Using a random-orbit sander With its compact and pliable sanding pad, the random-orbit sander is ideal for sanding contours such as a cabriole leg. Clamp down the workpiece and fasten a sanding disk to the sander’s pad. With the tool clear of the stock, switch it on and lower the pad onto the surface. Applying [...]

If you enjoy our post, feel free to subscribes to our rss feeds