1.Checking the cutting edge for square Use a combination square to determine whether the cutting edge of the plane blade is square to the sides. If it is not, square the cutting edge on a bench grinder, making sure to adjust the grinder’s tool rest at 90″ to the wheel. 2.Creating a hollow-ground bevel Sharpening [...]

If you enjoy our post, feel free to subscribes to our rss feeds

To bore holes that are centered on the surface of a board, use the shopmade center-drilling jig shown above. The illustration provides suggested dimension. Use a straight piece of 1-by-1 stock for the jig arm. You can make such a device any length you choose, but cutting it to the length shown allows it to [...]

If you enjoy our post, feel free to subscribes to our rss feeds