The basic design of this twin bed is very simple and sturdy.While templates are provided for the headboard and foot board,you can create your own pattern if you prefer.In fact,it might be a good idea to select a mattress first and then adjust the dimensions to fit.

1. Make full-size templates for the headboard(A) and foot board(B) using the patterns provided.
2. Glue up a pair of panels for the headboard and foot board from 2 x 6 and/or 2 x 8 stock. When the glue has dried, sand the panels smooth and cut them to the dimensions given.
3. Transfer the template designs to the panels. Cut out the headboard and foot board pieces,then sand their edges smooth.
4. Cut the remaining pieces to size using the dimensions provided.
5. Attach a sideboard support(E) to each foot(C) using flathead wood screws. Make two right-facing feet and two left-facing feet.



6. Fasten the feet to the headboard and footboard using glue and #10 x 2-1/2″ flathead wood screws. Drive the screws counterbored through the boards into the edges of the feet. Counterbore the holes and plug them to hide the screw heads.
7. Attach a slat support(G) to the bottom inside edge of each sideboard(D) by driving screws through the support into the sideboard. Counterbore the screws for extra holding power.
8. Attach the sideboards to the feet,resting the sideboards on the supports inside the feet. Use four flathead wood screws at each corner,fastening from the inside. Do not use glue.
9. Add the slats(F), sand the entire bed,and finish as desired.

Twin Bed Project  — List of Materials

You Can Download More Kids Bed Projects Patterns From Grand Fine Woodworking Plans.

Popularity: 25% [?]

Related Content

Subscribe to the post comments feeds or Leave a trackback